Index: bootcd/isolinux/syslinux-6.03/man/extlinux.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/extlinux.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/extlinux.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,73 @@
+.TH extlinux "1" "18 December 2007" "SYSLINUX for ext2/ext3 filesystem"
+.SH NAME
+extlinux \- install the \s-1SYSLINUX\s+1 bootloader on a ext2/ext3 filesystem
+.SH SYNOPSIS
+.B extlinux
+[\fIoptions\fP] \fIdirectory\fP
+.SH DESCRIPTION
+\fBEXTLINUX\fP is a new syslinux derivative, which boots from a Linux ext2/ext3
+filesystem.  It works the same way as \fBSYSLINUX\fP, with a few slight modifications.
+It is intended to simplify first-time installation of Linux, and for creation of
+rescue and other special-purpose boot disks.
+.PP
+The installer is designed to be run on a mounted directory.  For example, if you have an
+ext2 or ext3 usb key mounted on /mnt, you can run the following command:
+.IP
+.B extlinux --install /mnt
+.SH OPTIONS
+.TP
+\fB\-H\fR, \fB\-\-heads\fR=#
+Force the number of heads.
+.TP
+\fB\-i\fR, \fB\-\-install\fR
+Install over the current bootsector.
+.TP
+\fB\-O\fR, \fB\-\-clear\-once\fR
+Clear the boot-once command.
+.TP
+\fB\-o\fR, \fB\-\-once\fR=\fIcommand\fR
+Execute a command once upon boot.
+.TP
+\fB\-M\fR, \fB\-\-menu\-save\fR=\fIlabel\fR
+Set the label to select as default on the next boot
+.TP
+\fB\-r\fR, \fB\-\-raid\fR
+Fall back to the next device on boot failure.
+.TP
+\fB\-\-reset\-adv\fR
+Reset auxiliary data.
+.TP
+\fB\-S\fR, \fB\-\-sectors\fR=\fI#\fR
+Force the number of sectors per track.
+.TP
+\fB\-U\fR, \fB\-\-update\fR
+Updates a previous \fBEXTLINUX\fP installation.
+.TP
+\fB\-z\fR, \fB\-\-zip\fR
+Force zipdrive geometry (-H 64 -S 32).
+.TP
+\fB\-\-device\fR=\fIdevicename\fR
+Override the automatic detection of device names.  This option is
+intended for special environments only and should not be used by
+normal users.  Misuse of this option can cause disk corruption and
+lost data.
+.SH FILES
+The extlinux configuration file needs to be named syslinux.cfg or
+extlinux.conf and needs to be stored in the extlinux installation
+directory. For more information about the contents of extlinux.conf,
+see syslinux(1) manpage, section files.
+.SH BUGS
+I would appreciate hearing of any problems you have with \s-1SYSLINUX\s+1.  I
+would also like to hear from you if you have successfully used \s-1SYSLINUX\s+1,
+especially if you are using it for a distribution.
+.PP
+If you are reporting problems, please include all possible information
+about your system and your BIOS; the vast majority of all problems
+reported turn out to be BIOS or hardware bugs, and I need as much
+information as possible in order to diagnose the problems.
+.PP
+There is a mailing list for discussion among \s-1SYSLINUX\s+1 users and for
+announcements of new and test versions. To join, send a message to
+majordomo@linux.kernel.org with the line:
+.SH SEE ALSO
+.BR syslinux (1)
Index: bootcd/isolinux/syslinux-6.03/man/gethostip.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/gethostip.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/gethostip.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,45 @@
+.TH "GETHOSTIP" "1"
+.SH "NAME"
+gethostip \(em convert an IP address into various formats
+.SH "SYNOPSIS"
+.PP
+\fBgethostip\fR [\fB-dxnf\fP]  [\fB\fIHOSTNAME|IP\fR\fP]
+.SH "DESCRIPTION"
+.PP
+This manual page documents briefly the
+\fBgethostip\fR command.
+.PP
+The \fBgethostip\fR utility converts the given hostname or
+IP address into a variety formats.  It is provided by the syslinux
+package to make it easier to calculate the appropriate names for
+pxelinux configuration files.  These filenames can be the complete
+hexadecimal representation for a given IP address, or a partial
+hexadecimal representation to match a range of IP addresses.
+
+.SH "OPTIONS"
+.PP
+A summary of options is included below.
+.IP "\fB-d\fP" 10
+Output the IP address in decimal format.
+.IP "\fB-x\fP" 10
+Output the IP address in hexadecimal format.
+.IP "\fB-n\fP" 10
+Output the host's canonical name.
+.IP "\fB-f\fP" 10
+Full output.  Outputs the IP address in all supported formats.
+Same as \fB-xdn\fP.
+
+.SH "SEE ALSO"
+.PP
+\fBsyslinux\fR(1)
+
+.PP
+More details can be found in the pxelinux documentation, which
+can be found in
+\fB/usr/share/doc/syslinux/pxelinux.doc.gz\fP on
+\fBDebian GNU/Linux\fP systems.
+
+.SH "AUTHOR"
+.PP
+This manual page was compiled by dann frazier <dannf@debian.org> for
+the \fBDebian GNU/Linux\fP system (but may be used by others).
Index: bootcd/isolinux/syslinux-6.03/man/isohybrid.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/isohybrid.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/isohybrid.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,64 @@
+.TH isohybrid 1 "17 Jan 2014" "isohybrid"
+.SH "NAME"
+isohybrid \(em Post-process an ISO 9660 image for booting as a hard disk.
+.SH "SYNOPSIS"
+.B isohybrid
+[\fBOPTIONS\fP]
+.I <boot.iso>
+.SH "DESCRIPTION"
+.PP
+The \fBisohybrid\fR utility modifies an ISO 9660 image generated with
+mkisofs, genisoimage, or compatible utilities, to be bootable as a CD-ROM or
+as a hard disk.
+.SH "OPTIONS"
+.TP
+\fB-h\fR \fI<X>\fR\fN
+.br
+Number of geometry heads (default 64)
+.TP
+\fB-s\fR \fI<X>\fR
+.br
+Number of geometry sectors (default 32)
+.TP
+\fB-e\fR \fI<X>\fR, \fB--entry\fR \fI<X>\fR
+Specify parititon entry number (1-4)
+.TP
+\fB-o\fR \fI<X>\fR, \fB--offset\fR \fI<X>\fR
+.br
+Specify partition offset (default 0)
+.TP
+\fB-t\fR \fI<X>\fR, \fB--type\fR \fI<X>\fR
+.br
+Specify partition type (default 0x17)
+.TP
+\fB-i\fR \fI<X>\fR, \fB--id\fR \fI<X>\fR
+.br
+Specify MBR ID (default random)
+.TP
+\fB-u\fR, \fB--uefi\fB
+Build EFI bootable image
+.TP
+\fB-m\fR, \fB--mac\fB
+Add Apple File Protocol partition table support
+.TP
+\fB--forcehd0\fR
+Assume we are laoded as disk ID 0
+.TP
+\fB--ctrlhd0\fR
+Assume disk ID 0 if the Ctrl key is pressed
+.TP
+\fB--partok\fR
+Allow booting from within a partition
+.TP
+\fB-?\fR, \fB--help\fR
+Display help
+.TP
+\fB-v\fR, \fB--verbose\fR
+Display verbose output
+.TP
+\fB-V\fR, \fB--version\fR
+Display version information
+
+.SH "SEE ALSO"
+.PP
+\fBmkisofs\fR(1)
Index: bootcd/isolinux/syslinux-6.03/man/lss16toppm.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/lss16toppm.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/lss16toppm.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,27 @@
+.TH "LSS16TOPPM" "1"
+.SH "NAME"
+lss16toppm \(em Convert an LSS-16 image to PPM
+.SH "SYNOPSIS"
+.PP
+\fBlss16toppm\fR [\fB-map\fP]  [< file.lss]  [> file.ppm]
+.SH "DESCRIPTION"
+.PP
+This manual page documents briefly the \fBlss16toppm\fR       command.
+
+.PP
+The \fBlss16toppm\fR utility converts an LSS-16 image to a
+PPM image.
+
+.SH "OPTIONS"
+.PP
+A summary of options is included below.
+.IP "\fB-map\fP" 10
+Output the color map to standard error.
+.SH "SEE ALSO"
+.PP
+\fBppmtolss16\fR(1)
+
+.SH "AUTHOR"
+.PP
+This manual page was compiled by dann frazier <dannf@debian.org> for
+the \fBDebian GNU/Linux\fP system (but may be used by others).
Index: bootcd/isolinux/syslinux-6.03/man/memdiskfind.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/memdiskfind.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/memdiskfind.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,10 @@
+.TH memdiskfind 1 "17 Jan 2014" "memdiskfind"
+.SH "NAME"
+memdiskfind \(em Simple utility to find a resident \fBmemdisk\fR instance.
+.SH "SYNOPSIS"
+.B memdiskfind
+.SH "DESCRIPTION"
+.PP
+The \fBmemdiskfind\fR utility searches memory for a \fBmemdisk\fR instance,
+and, if found, outputs the parameters needed to use the \fphram\fR driver in
+Linux to map it.
Index: bootcd/isolinux/syslinux-6.03/man/ppmtolss16.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/ppmtolss16.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/ppmtolss16.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,64 @@
+.TH "PPMTOLSS16" "1"
+.SH "NAME"
+ppmtolss16 \(em Convert a PPM to an LSS16 image
+.SH "SYNOPSIS"
+.PP
+\fBppmtolss16\fR [        \fB	  \fI#rrggbb\fR=\fIi\fR 	\fP        \&...]  [< input.ppm]  [> output.rle]
+.SH "DESCRIPTION"
+.PP
+This manual page documents briefly the \fBppmtolss16\fR command.
+
+.PP
+The \fBppmtolss16\fR program converts a "raw" PPM file with
+max 16 colors to a simple RLE-based format:
+
+.PP
+\fBsimple RLE-based format\fR
+.TS
+tab();
+l l.
+unint32 0x1413f3dmagic (littleendian)
+unint16 xsizelittleendian
+unint15 ysizelittleendian
+16 x unint8 r,g,bcolor map
+.TE
+.PP
+Color map is in 6-bit format (each byte is 0..63)
+.PP
+Then, a sequence of nybbles:
+.PP
+N   ... if N is != previous pixel, one pixel of color N, otherwise
+run sequence follows ...
+
+.PP
+M   ... if M > 0 then run length is M+1, otherwise run sequence is
+encoded in two nybbles, littleendian, +17
+
+.PP
+The nybble sequences are on a per-row basis, runs may not extend across
+rows and odd-nybble rows are zero-padded.
+
+.PP
+At the start of a row, the "previous pixel" is assumed to be zero.
+
+.SH "OPTIONS"
+.PP
+A summary of options is included below.
+.IP "\fB\fI#rrggbb\fR=\fIi\fR\fP" 10
+Specify that the color #rrggbb (hex) should be assigned index
+i (decimal).
+
+.SH "BUG"
+.PP
+This program cannot handle comments in the header, nor "plain" ppm
+format.
+
+.SH "SEE ALSO"
+.PP
+\fBppmtolss16\fR(1)
+
+.SH "AUTHOR"
+.PP
+This manual page was compiled by dann frazier <dannf@debian.org> for
+the \fBDebian GNU/Linux\fP system (but may be used by others).  Most of the content
+was written by H. Peter Anvin.
Index: bootcd/isolinux/syslinux-6.03/man/syslinux.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/syslinux.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/syslinux.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,387 @@
+.TH SYSLINUX 1 "19 July 2010" "SYSLINUX"
+.SH NAME
+syslinux \- install the \s-1SYSLINUX\s+1 bootloader on a FAT filesystem
+.SH SYNOPSIS
+.B syslinux
+[\fBOPTIONS\fP]
+.I device
+.SH DESCRIPTION
+\fBSyslinux\fP is a boot loader for the Linux operating system which
+operates off an MS-DOS/Windows FAT filesystem. It is intended to
+simplify first-time installation of Linux, and for creation of rescue
+and other special-purpose boot disks.
+.PP
+In order to create a bootable Linux floppy using \fBSyslinux\fP, prepare a
+normal MS-DOS formatted floppy. Copy one or more Linux kernel files to
+it, then execute the command:
+.IP
+.B syslinux \-\-install /dev/fd0
+.PP
+This will alter the boot sector on the disk and copy a file named
+.I ldlinux.sys
+into its root directory.
+.PP
+On boot time, by default, the kernel will be loaded from the image named
+LINUX on the boot floppy.  This default can be changed, see the section
+on the \fBsyslinux\fP configuration file.
+.PP
+If the Shift or Alt keys are held down during boot, or the Caps or Scroll
+locks are set, \fBsyslinux\fP will display a
+.BR lilo (8)
+-style "boot:" prompt. The user can then type a kernel file name
+followed by any kernel parameters. The \s-1SYSLINUX\s+1 bootloader
+does not need to know about the kernel file in advance; all that is
+required is that it is a file located in the root directory on the
+disk.
+.PP
+\fBSyslinux\fP supports the loading of initial ramdisks (initrd) and the
+bzImage kernel format.
+.SH OPTIONS
+.TP
+\fB\-i\fP, \fB\-\-install\fP
+Install \s-1SYSLINUX\s+1 on a new medium, overwriting any previously
+installed bootloader.
+.TP
+\fB\-U\fP, \fB\-\-update\fP
+Install \s-1SYSLINUX\s+1 on a new medium if and only if a version of
+\s-1SYSLINUX\s+1 is already installed.
+.TP
+\fB\-s\fP, \fB\-\-stupid\fP
+Install a "safe, slow and stupid" version of \s-1SYSLINUX\s+1. This version may
+work on some very buggy BIOSes on which \s-1SYSLINUX\s+1 would otherwise fail.
+If you find a machine on which the \-s option is required to make it boot
+reliably, please send as much info about your machine as you can, and include
+the failure mode.
+.TP
+\fB\-f\fP, \fB\-\-force\fP
+Force install even if it appears unsafe.
+.TP
+\fB\-r\fP, \fB\-\-raid\fB
+RAID mode.  If boot fails, tell the BIOS to boot the next device in
+the boot sequence (usually the next hard disk) instead of stopping
+with an error message.  This is useful for RAID-1 booting.
+.TP
+\fB\-d\fP, \fB\-\-directory\fP \fIsubdirectory\fP
+Install the \s-1SYSLINUX\s+1 control files in a subdirectory with the
+specified name (relative to the root directory on the device).
+.TP
+\fB\-t\fP, \fB\-\-offset\fP \fIoffset\fP
+Indicates that the filesystem is at an offset from the base of the
+device or file.
+.TP
+\fB\-\-once\fP \fIcommand\fP
+Declare a boot command to be tried on the first boot only.
+.TP
+\fB\-O\fP, \fB\-\-clear-once\fP
+Clear the boot-once command.
+.TP
+\fB\-H\fP, \fB\-\-heads\fP \fIhead-count\fP
+Override the detected number of heads for the geometry.
+.TP
+\fB\-S\fP, \fB\-\-sectors\fP \fIsector-count\fP
+Override the detected number of sectors for the geometry.
+.TP
+\fB\-z\fP, \fB\-\-zipdrive\fP
+Assume zipdrive geometry (\fI\-\-heads 64 \-\-sectors 32).
+.SH FILES
+.SS "Configuration file"
+All the configurable defaults in \s-1SYSLINUX\s+1 can be changed by putting a
+file called
+.B syslinux.cfg
+in the install directory of the boot disk. This
+is a text file in either UNIX or DOS format, containing one or more of
+the following items (case is insensitive for keywords).
+.PP
+This list is out of date.
+.PP
+In the configuration file blank lines and comment lines beginning
+with a hash mark (#) are ignored.
+.TP
+\fBdefault\fP \fIkernel\fP [ \fIoptions ...\fP ]
+Sets the default command line. If \fBsyslinux\fP boots automatically,
+it will act just as if the entries after "default" had been typed in
+at the "boot:" prompt.
+.IP
+If no DEFAULT or UI statement is found, or the configuration file is missing
+entirely, \s-1SYSLINUX\s+1 drops to the boot: prompt with an error message (if
+NOESCAPE is set, it stops with a "boot failed" message; this is also the case
+for PXELINUX if the configuration file is not found.)
+.TP
+NOTE: Until \s-1SYSLINUX\s+1 3.85, if no configuration file is present, or no
+"default" entry is present in the configuration file, the default is
+"linux auto".
+.TP
+Even earlier versions of \s-1SYSLINUX\s+1 used to automatically
+append the string "auto" to whatever the user specified using
+the DEFAULT command.  As of version 1.54, this is no longer
+true, as it caused problems when using a shell as a substitute
+for "init."  You may want to include this option manually.
+.TP
+.BI append " options ..."
+Add one or more \fIoptions\fP to the kernel command line. These are added both
+for automatic and manual boots. The options are added at the very beginning of
+the kernel command line, usually permitting explicitly entered kernel options
+to override them. This is the equivalent of the
+.BR lilo (8)
+ "append" option.
+.PP
+.nf
+.BI label\  label
+.RS 2
+.BI kernel\  image
+.BI append\  options\ ...
+.RE
+.fi
+.RS
+Indicates that if \fIlabel\fP is entered as the kernel to boot, \fBsyslinux\fP should
+instead boot \fIimage\fP, and the specified "append" options should be used
+instead of the ones specified in the global section of the file (before the
+first "label" command.) The default for \fIimage\fP is the same as \fIlabel\fP,
+and if no "append" is given the default is to use the global entry (if any).
+Use "append -" to use no options at all.  Up to 128 "label" entries are
+permitted.
+.IP
+The "image" doesn't have to be a Linux kernel; it can be a boot sector (see below.)
+.RE
+.TP
+.BI implicit\  flag_val
+If \fIflag_val\fP is 0, do not load a kernel image unless it has been
+explicitly named in a "label" statement.  The default is 1.
+.TP
+.BI timeout\  timeout
+Indicates how long to wait at the "boot:" prompt until booting automatically, in
+units of 1/10 s. The timeout is cancelled as soon as the user types anything
+on the keyboard, the assumption being that the user will complete the command
+line already begun. A timeout of zero will disable the timeout completely,
+this is also the default. The maximum possible timeout value is 35996;
+corresponding to just below one hour.
+.TP
+\fBserial\fP \fIport\fP [ \fIbaudrate\fP ]
+Enables a serial port to act as the console. "port" is a number (0 = /dev/ttyS0
+= COM1, etc.); if "baudrate" is omitted, the baud rate defaults to 9600 bps.
+The serial parameters are hardcoded to be 8 bits, no parity, 1 stop bit.
+.IP
+For this directive to be guaranteed to work properly, it
+should be the first directive in the configuration file.
+.TP
+.BI font\  filename
+Load a font in .psf format before displaying any output (except the copyright
+line, which is output as ldlinux.sys itself is loaded.) \fBsyslinux\fP only loads
+the font onto the video card; if the .psf file contains a Unicode table it is
+ignored.  This only works on EGA and VGA cards; hopefully it should do nothing
+on others.
+.TP
+.BI kbdmap\  keymap
+Install a simple keyboard map. The keyboard remapper used is \fIvery\fP
+simplistic (it simply remaps the keycodes received from the BIOS, which means
+that only the key combinations relevant in the default layout \- usually U.S.
+English \- can be mapped) but should at least help people with AZERTY keyboard
+layout and the locations of = and , (two special characters used heavily on the
+Linux kernel command line.)
+.IP
+The included program
+.BR keytab-lilo.pl (8)
+from the
+.BR lilo (8)
+ distribution can be used to create such keymaps.
+.TP
+.BI display\  filename
+Displays the indicated file on the screen at boot time (before the boot:
+prompt, if displayed). Please see the section below on DISPLAY files. If the
+file is missing, this option is simply ignored.
+.TP
+.BI prompt\  flag_val
+If \fIflag_val\fP is 0, display the "boot:" prompt only if the Shift or Alt key
+is pressed, or Caps Lock or Scroll lock is set (this is the default).  If
+\fIflag_val\fP is 1, always display the "boot:" prompt.
+.PP
+.nf
+.BI f1\  filename
+.BI f2\  filename
+.I ...
+.BI f9\  filename
+.BI f10\  filename
+.BI f11\  filename
+.BI f12\  filename
+.fi
+.RS
+Displays the indicated file on the screen when a function key is pressed at the
+"boot:" prompt. This can be used to implement pre-boot online help (presumably
+for the kernel command line options.)
+.RE
+.IP
+When using the serial console, press \fI<Ctrl-F><digit>\fP to get to
+the help screens, e.g. \fI<Ctrl-F>2\fP to get to the f2 screen.  For
+f10-f12, hit \fI<Ctrl-F>A\fP, \fI<Ctrl-F>B\fP, \fI<Ctrl-F>C\fP.  For
+compatiblity with earlier versions, f10 can also be entered as
+\fI<Ctrl-F>0\fP.
+.SS "Display file format"
+DISPLAY and function-key help files are text files in either DOS or UNIX
+format (with or without \fI<CR>\fP). In addition, the following special codes
+are interpreted:
+.TP
+\fI<FF>\fP = \fI<Ctrl-L>\fP = ASCII 12
+Clear the screen, home the cursor.  Note that the screen is
+filled with the current display color.
+.TP
+\fI<SI><bg><fg>\fP, \fI<SI>\fP = \fI<Ctrl-O>\fP = ASCII 15
+Set the display colors to the specified background and foreground colors, where
+\fI<bg>\fP and \fI<fg>\fP are hex digits, corresponding to the standard PC
+display attributes:
+.IP
+.nf
+.ta \w'5 = dark purple    'u
+0 = black	8 = dark grey
+1 = dark blue	9 = bright blue
+2 = dark green	a = bright green
+3 = dark cyan	b = bright cyan
+4 = dark red	c = bright red
+5 = dark purple	d = bright purple
+6 = brown	e = yellow
+7 = light grey	f = white
+.fi
+.IP
+Picking a bright color (8-f) for the background results in the
+corresponding dark color (0-7), with the foreground flashing.
+.IP
+colors are not visible over the serial console.
+.TP
+\fI<CAN>\fPfilename\fI<newline>\fP, \fI<CAN>\fP = \fI<Ctrl-X>\fP = ASCII 24
+If a VGA display is present, enter graphics mode and display
+the graphic included in the specified file.  The file format
+is an ad hoc format called LSS16; the included Perl program
+"ppmtolss16" can be used to produce these images.  This Perl
+program also includes the file format specification.
+.IP
+The image is displayed in 640x480 16-color mode.  Once in
+graphics mode, the display attributes (set by \fI<SI>\fP code
+sequences) work slightly differently: the background color is
+ignored, and the foreground colors are the 16 colors specified
+in the image file.  For that reason, ppmtolss16 allows you to
+specify that certain colors should be assigned to specific
+color indicies.
+.IP
+Color indicies 0 and 7, in particular, should be chosen with
+care: 0 is the background color, and 7 is the color used for
+the text printed by \s-1SYSLINUX\s+1 itself.
+.TP
+\fI<EM>\fP, \fI<EM>\fP = \fI<Ctrl-U>\fP = ASCII 25
+If we are currently in graphics mode, return to text mode.
+.TP
+\fI<DLE>\fP..\fI<ETB>\fB, \fI<Ctrl-P>\fP..\fI<Ctrl-W>\fP = ASCII 16-23
+These codes can be used to select which modes to print a
+certain part of the message file in.  Each of these control
+characters select a specific set of modes (text screen,
+graphics screen, serial port) for which the output is actually
+displayed:
+.IP
+.nf
+Character                       Text    Graph   Serial
+------------------------------------------------------
+<DLE> = <Ctrl-P> = ASCII 16     No      No      No
+<DC1> = <Ctrl-Q> = ASCII 17     Yes     No      No
+<DC2> = <Ctrl-R> = ASCII 18     No      Yes     No
+<DC3> = <Ctrl-S> = ASCII 19     Yes     Yes     No
+<DC4> = <Ctrl-T> = ASCII 20     No      No      Yes
+<NAK> = <Ctrl-U> = ASCII 21     Yes     No      Yes
+<SYN> = <Ctrl-V> = ASCII 22     No      Yes     Yes
+<ETB> = <Ctrl-W> = ASCII 23     Yes     Yes     Yes
+.fi
+.IP
+For example:
+.nf
+<DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB>
+.fi
+ ... will actually print out which mode the console is in!
+.TP
+\fI<SUB>\fP = \fI<Ctrl-Z>\fP = ASCII 26
+End of file (DOS convention).
+.SS Other operating systems
+This version of \fBsyslinux\fP supports chain loading of other operating
+systems (such as MS-DOS and its derivatives, including Windows 95/98).
+.PP
+Chain loading requires the boot sector of the foreign operating system
+to be stored in a file in the root directory of the filesystem.
+Because neither Linux kernels, nor boot sector images have reliable magic
+numbers, \fBsyslinux\fP will look at the file
+extension. The following extensions are recognised:
+.PP
+.nf
+.ta \w'none or other    'u
+none or other	Linux kernel image
+BSS	Boot sector (DOS superblock will be patched in)
+BS	Boot sector
+.fi
+.PP
+For filenames given on the command line, \fBsyslinux\fP will search for the
+file by adding extensions in the order listed above if the plain
+filename is not found. Filenames in KERNEL statements must be fully
+qualified.
+.PP
+.SS Novice protection
+\fBSyslinux\fP will attempt to detect if the user is trying to boot on a 286
+or lower class machine, or a machine with less than 608K of low ("DOS")
+RAM (which means the Linux boot sequence cannot complete).  If so, a
+message is displayed and the boot sequence aborted.  Holding down the
+Ctrl key while booting disables this feature.
+.PP
+The compile time and date of a specific \fBsyslinux\fP version can be obtained
+by the DOS command "type ldlinux.sys". This is also used as the
+signature for the LDLINUX.SYS file, which must match the boot sector
+.PP
+Any file that \fBsyslinux\fP uses can be marked hidden, system or readonly if
+so is convenient; \fBsyslinux\fP ignores all file attributes.  The \s-1SYSLINUX\s+1
+installed automatically sets the readonly attribute on LDLINUX.SYS.
+.SS Bootable CD-ROMs
+\s-1SYSLINUX\s+1 can be used to create bootdisk images for El
+Torito-compatible bootable CD-ROMs. However, it appears that many
+BIOSes are very buggy when it comes to booting CD-ROMs. Some users
+have reported that the following steps are helpful in making a CD-ROM
+that is bootable on the largest possible number of machines:
+.IP \(bu
+Use the -s (safe, slow and stupid) option to \s-1SYSLINUX\s+1
+.IP \(bu
+Put the boot image as close to the beginning of the
+ISO 9660 filesystem as possible.
+.PP
+A CD-ROM is so much faster than a floppy that the -s option shouldn't
+matter from a speed perspective.
+.PP
+Of course, you probably want to use ISOLINUX instead.  See the
+documentation file
+.BR isolinux.doc .
+.SS Booting from a FAT partition on a hard disk
+\s-1SYSLINUX\s+1 can boot from a FAT filesystem partition on a hard
+disk (including FAT32). The installation procedure is identical to the
+procedure for installing it on a floppy, and should work under either
+DOS or Linux. To boot from a partition, \s-1SYSLINUX\s+1 needs to be
+launched from a Master Boot Record or another boot loader, just like
+DOS itself would. A sample master boot sector (\fBmbr.bin\fP) is
+included with \s-1SYSLINUX\s+1.
+.SH BUGS
+I would appreciate hearing of any problems you have with \s-1SYSLINUX\s+1.  I
+would also like to hear from you if you have successfully used \s-1SYSLINUX\s+1,
+especially if you are using it for a distribution.
+.PP
+If you are reporting problems, please include all possible information
+about your system and your BIOS; the vast majority of all problems
+reported turn out to be BIOS or hardware bugs, and I need as much
+information as possible in order to diagnose the problems.
+.PP
+There is a mailing list for discussion among \s-1SYSLINUX\s+1 users and for
+announcements of new and test versions. To join, send a message to
+majordomo@linux.kernel.org with the line:
+.PP
+.B subscribe syslinux
+.PP
+in the body of the message. The submission address is syslinux@linux.kernel.org.
+.SH SEE ALSO
+.BR lilo (8),
+.BR keytab-lilo.pl (8),
+.BR fdisk (8),
+.BR mkfs (8),
+.BR superformat (1).
+.SH AUTHOR
+This manual page is a modified version of the original \fBsyslinux\fP
+documentation by H. Peter Anvin <hpa@zytor.com>. The conversion to a manpage
+was made by Arthur Korn <arthur@korn.ch>.
Index: bootcd/isolinux/syslinux-6.03/man/syslinux2ansi.1
===================================================================
--- bootcd/isolinux/syslinux-6.03/man/syslinux2ansi.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
+++ bootcd/isolinux/syslinux-6.03/man/syslinux2ansi.1	(revision e16e8f2a41938d263af54a9fd6b4020d6c0d69fa)
@@ -0,0 +1,41 @@
+.TH SYSLINUX2ANSI 1
+.SH NAME
+syslinux2ansi \- converts a syslinux-format screen to pc-ansi
+.SH SYNOPSIS
+.B syslinux2ansi
+< filename.input > filename.output
+.SH DESCRIPTION
+.I Syslinux2ansi
+is a filter which converts a screen formatted for syslinux to one
+compatible with PC ANSI.  It will only read from standard in, and has
+no command line options.
+.SH BUGS
+Help and version command line options would be useful.
+.PP
+The ability to put input and output filenames on the command line might
+be good as well.
+.SS Bug reports
+I would appreciate hearing of any problems you have with SYSLINUX.  I
+would also like to hear from you if you have successfully used SYSLINUX,
+especially if you are using it for a distribution.
+.PP
+If you are reporting problems, please include all possible information
+about your system and your BIOS; the vast majority of all problems
+reported turn out to be BIOD or hardware bugs, and I need as much
+information as possible in order to diagnose the problems.
+.PP
+There is a mailing list for discussion among SYSLINUX users and for
+announcements of new and test versions.   To join, send a message to
+majordomo@linux.kernel.org with the line:
+.PP
+.B subscribe syslinux
+.PP
+in the body of the message.  The submission address is
+syslinux@linux.kernel.org.
+.SH "SEE ALSO"
+.BR syslinux(1),
+.BR perl(1)
+.SH AUTHOR
+This manual page is a quick write-up for Debian done by Kevin Kreamer
+<kkreamer@etherhogz.org>, by looking over the 1 screenful of Perl that is
+.B syslinux2ansi.
